Trimpro – Unplugged / Standard / Worldwide
Our quietest trimmer ever, the new TRIMPRO UNPLUGGED is a light, yet rugged ‘go-anywhere’ model designed for the home enthusiast and ideal for use in the apartment, greenhouse, or any situation where a need for noise discretion means power models just won’t do. It gently processes flowers with slim leather fingers encouraging leaves onto its grate and the razor-edged, stainless steel blades below. And speed, of course, is controlled by your very own hand.
The most advanced and efficient power-free trimming unit ever developed, no aspect of the TRIMPRO UNPLUGGED has been overlooked in its design. The size, weight and shape, along with the reversible trimming action, all contribute to its ideal ergonomics. The leather fingers are treated with natural oils to reduce adhesiveness and maintain their suppleness. The stainless steel blades are of the highest possible quality, and of course, blade height is adjustable as with all TRIMPRO products.
How The Trimpro Unplugged Works
The Trimpro unplugged is completely manual, as the name suggests. This means taking the trimmer to the field is easier than ever, with no concern for finding an outlet or bringing extension cords. It was designed to get you tight trim with minimal effort and flower agitation.
It uses slim leather fingers, which gently moves flowers across the grade which houses the razor-sharp stainless steel blades, which trim the buds. You control the speed by how hard you crank, but it doesn’t take very much!
User-Friendly & Ergonomic
We know hand trimming is hated by many. The Trimpro Unplugged makes it much easier and less painful, though. It features the most ideal ergonomics possible, with the perfect size, weight, shape, and mechanics. The leather fingers have been treated with natural oils, which reduces the build up of plant matter and maintain their suppleness.
The stainless steel blades of this trimmer get you a super tight, clean trim, with minimal degradation of the flower so there is no loss of potency. It features reversible trimming action, and an adjustable blade height to fine-tune the degree to which you trim.
Minimal Maintenance & Easy Cleaning
Cleaning and maintaining your trimming scissors is a hassle, but cleaning and maintaining the Trimpro Unplugged is easy! You can easily remove the blade assembly to sharpen it as needed, keeping a consistent, sharp cut. It’s super easy to clean the non-stick grate, with a simple cloth and iso-spray between uses. It’s easy to dissamble the unit for a deep cleaning and to undergo routine maintenance.
GENERAL WARNING
- Never put your fingers, gloves or any other body part in contact with the grate, the blade and/or the rotor.
- Never apply pressure on the grate.
- Do not use scissors, knives or any instrument above the grate.
- Safety glasses and gloves are required at all times.
- Gloves have to be tight enough so they can’t get inside the grate slots. A loose glove is dangerous, beware!
- To be used in accordance with all applicable laws and regulations. The manufacturer does not accept any responsibility for damages caused to or by the TRIMPRO ROTOR XL which is the result of improper use or assembly.
Trimpro – Unplugged / Standard / Worldwide
FORMAT:
Mounted machine: 13.5″ Diameter x 12″ (16″ with handle installed)
Packaging: 14″ x 14″ x 13″
WEIGHT:
Machine only: 7.5 Lbs
Machine and packaging: 9 Lbs
MATERIAL:
Frame: Aluminum
Grate: Steel
GRATE:
Trimpro Unplugged (STD): Slots size 1/4″
Click Here to Download manual
How Do I clean My Trimpro Machine?
Use a plastic scraper to collect the pollen build-up. Do not use a metal scraper as it might scratch the coating on the grate and the blade. Use a cloth with rubbing alcohol to finish cleaning it.
How Do I Clean My Trimpro Bag?
Soak the bag in warm water, rub off the build up. You can also soak it in rubbing alcohol for a short amount of time, rub off the residue and simply pass it through some running water to finish cleaning it.
How Do I Adjust The Height Of My Trimpro Blade?
Blade height adjustment instructions can be found for each machine on their respective instruction sheet.
How Often Should I Sharpen My Trimpro Blade?
Trimpro blades are made of tempered steel which makes them very tough and gives them a great lifespan. It is important for the quality of your manicure to keep them sharp. It is manufacturer recommend to have them sharpened every 6 months to every year (highly depending on usage).
How Do I Sharpen My Trimpro Blade?
Sharpening the blade on Trimpro trimmers is a simple process. The most important part of the process is that you should not remove the blade from the hub to which it is attached! The tempered steel blades are balanced on the aluminum hub, allowing optimal operation of the trimmers. If the blade is separated from the hub there is no guaranty that the assembly will be balanced when you put it back into the machine. Sharpening instructions can be found for each machine on their respective instruction sheet.
How Do I Change The Amount Of Air Suction On My Trimpro Machine?
On every machine (except the Rotor) you can bend the flaps upwards to reduce their angle. This creates less air displacement, thus decreasing the amount of suction. You can bend the flaps downwards to increase their angle. This creates more air displacement thus increasing the amount of suction. *CAUTION: When bending the flaps downwards, make sure the flaps do not hit the metal wire brake line.
How Long Is The Warranty On My Trimpro Machine?
There is one year warranty for defective parts. If you are making a warranty claim, please have in hand the serial number engraved on the underside of the frame of the machine.
We work very hard to ensure that we offer the absolute best prices online. We work with our suppliers to ensure that they set minimum advertised pricing guidelines for all of our competitors.
Our 100% Price Guarantee has some limitations:
- You must purchase the item from our website before requesting your Price Match Guarantee
- Promotions such as rebates and “buy one, get one free” offers are not eligible
- The item must be in stock on the competitor’s website
- The competitor must be an online store, they may not have a retail location
- The website can not be a discounter or auction website (ie; eBay, overstock, Walmart, Amazon, etc..)
- The competitor must be an Authorized Retailer of the product in question
- The Price Match Guarantee includes the item price and the shipping charges, it excludes sales tax
Our goal is to keep the order and delivery process as simple as possible. Products are delivered directly from manufacturers and they are shipped between 1 and 2 business days once you make the order. Total delivery time varies between 3 and 7 business days if your product is in stock.
Please check our Shipping and Returns policies for further information:
If you still have any doubt about the ordering and shipping process, feel free to contact us by email at [email protected].
Matthew B –
After using trimmers in the $2,000 and $12,000 price range. I can honestly say this trimmer out does them all. First off, this thing is just the right size to keep a room full of people busy plucking with one guy running it. Secondly you can keep this machine in the trim room with you without major disruption. It’s small and relativly quiet compared to other models. Most importantly to this machine and why I love it is because it takes any buds smaller than a large mans thumb and turns them into perfectly sculpted buds while preserving the integrity of the trim. There is no product waste and no damage to the buds. We ordered a second machine the first week we had this one its so damn good. This machine will save you time. So much time that it pays for itself again and again. Its easy to set up and use and delivers beautiful results. A clean up tip, spray the blade and grate with cooking oil before each use so that hash is easy to collect.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Anthony –
I needed a consistent trim on my flowers and this product delivers. This item saved me considerable time while harvesting this season. I researched a lot of (cheap) no name, medium (popular) names and always arrived back at the TrimPro. I spent the extra money in the front and am by no means disappointed and would not trade it on another.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Nick –
I love it! What a time saver! We used to hang to dry, which took about a week or longer. Now takes only 3 days to dry.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal