TRRTSTCA/TRRXSTCA – Rotor / Standard – Trimpro
The new TRIMPRO ROTOR STANDARD has been designed and developed at the request of end-users, who are looking for yet another gentle and efficient Trimpro quality product. Includes the leather fingers to circulate your flowers over our non-stick grate and our razor-sharp tempered steel blades to trim the leaves. In addition, it is built at an angle; emptying the Rotor is as simple as swinging the latch to open the door. Your perfectly cut flowers gently exit the upper cylinder, all while the machine is still running, so production is non-stop. And, as with all our devices, the blade height is adjustable to meet every preference.
Trimming, separate the fresh flowers from the branches, put them into the upper container of the trimmer, and let the Trimpro Rotor do the rest.
*For Wet Trimming Only* – All Trimpro Trimmers are designed to be used with a wet product only. If used with dry product, damage may occur.
Features
- Robotic Touch: Soft leather fingers to circulate your flowers over the non-stick grate; the razor-sharp tempered steel blades trim the leaves. These leather fingers help to tumble the flowers softly to allow the blade to cut all sides of the flower.
- Easy to Use: Built at an angle, emptying the Trimpro Rotor is as simple as swinging the latch to open the door, and your perfectly trimmed flowers gently exit the upper cylinder, all while the machine is still running, so production is non-stop.
- Easy to Maintain: The blade assembly can be easily removed for sharpening to ensure you always get the cleanest cut. Cleaning the non-stick grate is a breeze. Just spray the grate and blade with isopropyl alcohol between uses to ensure a clean and sharp cut.
- Blade height: is adjustable to meet every preference.
General Warning:
- Never place your fingers, gloves, or other body parts in contact with the grate or the blade.
- Never apply pressure on the grate.
- Do not use scissors, knives, or any instrument above the grate.
- Safety glasses and gloves are required at all times.
- The gloves have to be tight enough, so they don’t get inside the grate slots. A loose glove is dangerous. BE AWARE!
Trimpro does not accept any responsibility for damages caused to or by the trimmers resulting from an inadequate use or assembly. Use the trimmers following existing laws and regulations.
User Manual – Trimpro Rotor:
TRRTSTCA/TRRXSTCA – Rotor / Standard – Trimpro
FORMAT:
Mounted machine: 16″ Diameter x 21″
Packaging: 21″ x 21″ x 24″
WEIGHT:
Machine only: 30 Lbs
Machine and packaging: 42 Lbs
MATERIAL:
Frame: Aluminum
Grate: Steel
GRATE:
Trimpro Rotor (STD): Slots size 1/4″
Click Here to Download manual
FORMAT:
Mounted machine: 28″ Diameter x 52″
Machine Packaging: 34″ x 34″ x 29″
Stand Packaging: 32″ x 32″ x 17″
WEIGHT:
Mounted Machine: 145 Lbs
Machine only and packaging: 135 Lbs
Stand only and packaging: 35 Lbs
MATERIAL:
Frame: Aluminum
Blades: Tempered Steel
GRATE:
Non-Stick Coated Steel
Standard: Slot size 1/4”(6mm)
Click Here to Download manual
How Do I clean My Trimpro Machine?
Use a plastic scraper to collect the pollen build-up. Do not use a metal scraper as it might scratch the coating on the grate and the blade. Use a cloth with rubbing alcohol to finish cleaning it.
How Do I Clean My Trimpro Bag?
Soak the bag in warm water, rub off the build-up. You can also soak it in rubbing alcohol for a short amount of time, rub off the residue and simply pass it through some running water to finish cleaning it.
How Do I Adjust The Height Of My Trimpro Blade?
Blade height adjustment instructions can be found for each machine on their respective instruction sheet.
How Often Should I Sharpen My Trimpro Blade?
Trimpro blades are made of tempered steel which makes them very tough and gives them a great lifespan. It is important for the quality of your manicure to keep them sharp. It is manufacturer recommend to have them sharpened every 6 months to every year (highly depending on usage).
How Do I Sharpen My Trimpro Blade?
Sharpening the blade on Trimpro trimmers is a simple process. The most important part of the process is that you should not remove the blade from the hub to which it is attached! The tempered steel blades are balanced on the aluminum hub, allowing optimal operation of the trimmers. If the blade is separated from the hub there is no guaranty that the assembly will be balanced when you put it back into the machine. Sharpening instructions can be found for each machine on their respective instruction sheet.
How Do I Change The Amount Of Air Suction On My Trimpro Machine?
On every machine (except the Rotor) you can bend the flaps upwards to reduce their angle. This creates less air displacement, thus decreasing the amount of suction. You can bend the flaps downwards to increase their angle. This creates more air displacement thus increasing the amount of suction. *CAUTION: When bending the flaps downwards, make sure the flaps do not hit the metal wire brake line.
How Long Is The Warranty On My Trimpro Machine?
There is one year warranty for defective parts. If you are making a warranty claim, please have in hand the serial number engraved on the underside of the frame of the machine.
Our goal is to keep the order and delivery process as simple as possible. Products are delivered directly from manufacturers and they are shipped between 1 and 2 business days once you make the order. Total delivery time varies between 3 and 7 business days if your product is in stock.
Please check our Shipping and Returns policies for further information:
If you still have any doubt about the ordering and shipping process, feel free to contact us by email at [email protected].
John –
I have used this machine for the last 5 months. I absolutely recommend this tool. Spend the time in the beginning to dial it in for the job your doing and she’ll do the rest. I usually feed her a couple of Oz at a time and let it go for about 30 seconds.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Terry Ortega –
This machine works great for cleaning up small buds. We only run bottoms with it and saves alot of time that would be spent doing them by hand. I would recommend using on all of your buds as the tops will just get tossed around alot and take just as long to final trim. to clean I soak the top in alcohol and wipe the leather fingers with olive oil. Pretty simple compared to the more expensive machines out there.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Ron –
this is a nice trimmer works real well
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jessica –
Came exactly as described arrived before the actual delivery date. Definitely worth the money for an operation where you are using it every month
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal